x:tek · High Performance Trackway Mat Set
10 Trackway Mats a 2,44m² = 24,40m² / 20,00 rm, incl. steel pallet & corner bracket set. Also available as sets of 20 / 30 mats.
- 2000 x 1220 x 12 mm | 32 kg
- Load capacity up to ¹85t | ²40t | ³15t **
- Profiled on both sides, 6|6 mm
- Total thickness 24 mm for 6|6 mm
- 12 connection holes
- 3-stage profile for more grip
- Channels for faster drainage
- Order number: XT-SET10-66-ST400
Features & Highlights
& break resistant HDPE
manually by hand
with high R11 slip resistance
Pltforms & Pads
x:tek 46 - set of 10 driving plates - 24,40 m² - 20,00 lfm - 6mm smart GRIP mm / 1mm roughGRIP - profile structure (selectable) - Loadable up to approx. 85 tons - The driving plate set includes: 10 pcs x:tek driving plates (2000 x 1220 x 12mm) , 1 x steel pallet ZSP46, 20 x single steel connectors, 1 x hand hook steel, 1 x accessories case, 4 x securing angles steel 40 cm. The x:tek next generation high performance moving panels(2000 x 1220 x 12 mm) with smartGRIP the unique 3 step profile design and the innovative channel system. Over 12 years of practical experience and 2 years of product design have gone into the development of the x:tek plastic driving plate. The result is probably one of the most functional and economical drive plates on the market. There are so many innovations and advantages in the x:tek moving plate as in hardly any other moving plate available on the market, so that we do not know where to start first.
Innovative plastic drive plates for mobile construction roads and platforms
The smartGRIP profile design is the first in the world with 3 different profile heights implemented in one profile design (0.1mm / 3 mm / 6 mm). One of the goals in the development of the tread design was to achieve the requirement that the tread works perfectly for pedestrians as well as for vehicles and construction machinery. When it comes to pedestrian traffic, the focus is on the safe, trip-free and pleasant walkability of the treads. For vehicles and construction equipment, on the other hand, the profiling must produce maximum traction even in the most difficult terrain with steep longitudinal and/or transverse slopes under the most adverse conditions (rain, snow, mud).
Symmetrical & multidirectional
Another outstanding feature of the smartGRIP tread design is the symmetrically perfectly arranged tread pattern. This symmetrical arrangement of the tread ensures that regardless of the direction of travel, the direction of use or the direction in which the tread plates are laid, the tread pattern consistently produces the maximum possible grip - in other words, multidirectional.
Water & mud
The likewise multidirectional channel system of the x:tek track pads with smartGRIP was designed to effectively drain water, dirt and mud from the track pads in a barrier-free, fast and targeted manner. In any case, the slightly rough surface of the driving plate reduces the adhesion of dirt, similar to the lotus blossom effect.
Stress-reduced & more durable
Due to the sophisticated design, we were also able to evenly absorb the stress in the material (HDPE plastic) caused by driving over the plates (carpet effect) and distribute it into the plate or material. This is made possible by the channel system of our design, as in the area of the multidirectional channel system the material thickness is always constant.
Sophisticated & Economical
If you look closely at the smartGRIP profile, you will hardly notice a horizontal line in the profile design. Why is this important? At the latest when you or your employees have to clean the treads after work, you will know it. Normally, the panels are placed vertically or horizontally on the edge and sprayed with a high-pressure cleaner. Dirt and water always remain on every horizontal profile element because it cannot run off. With smartGRIP profiling, you save up to 15% water, time and costs when cleaning the driving plates.
Detailed & Optimized
The fact that we have really thought of all the details in the profile design can be seen when piling up the track pads with the smartGRIP profile design on both sides. The profiles do not lie congruently on top of each other, but nest or interlock with a slight offset. This effectively reduces the height by up to 25% (55 cm instead of 76 cm) and the transport volume by up to 38% (1.34 m3 instead of 1.85 m3) based on a set of 30 panels.
Lighter & easier to handle
Compared to all other solutions made of wood, aluminum or steel, plastic moving panels have the big advantage that they are much lighter (x:tek 46 = 32 kg light) and more compact (x:tek 46 = 2000 x 1220 mm). Due to these characteristics, the x:tek driving plates are laid and coupled or connected to each other exclusively by hand. On the one hand, this saves expensive machine hours, and on the other hand, the wheel loader or excavator can be used during this time for what it was actually made for. As a rule of thumb, you can assume the following values for the laying time of x:tek 46 high-performance driving plates: 30 x:tek driving plates are laid in 30 minutes by 3 employees, depending on the connection technology used. This corresponds to a 2-lane mobile construction road or driving lane of 30 running meters or a platform with a total area of just under 75 square meters.
Corner holes & center holes
The x:tek mobile platforms have a 12-hole system to couple or connect the individual mobile platforms with each other. There is a connecting hole at each of the 4 corners of the panel, and there are also double center holes in the middle of the longitudinal and transverse sides of the panel (4 sides with 2 holes each = 8 holes). The 12-hole system thus enables both longitudinal and transverse coupling of the drive plates. It is also possible to couple the drive plates longitudinally in a half unit. The advantage of the center holes is noticeable on very uneven, softened or rutted floors. If the x:tek drive plates are connected to each other at the center hole by means of connection technology, no gap or height offset can occur at the transition of the plates. This reduces stress (wear) in the plate and increases the safety and cleanliness of a platform or construction road produced in this way.
Practical & Cleaner
We have deliberately dispensed with so-called finger holes, i.e. milled-out hand grips, because of the resulting reduced product life and unsuitability for practical use. Grip holes weaken drive plates, so that experience has shown that they break at precisely this point. In addition, mud and sludge would be washed onto the plates when driving over them. As a result, the driving plates become increasingly muddy and slippery, and when the driving plates are left, the mud is transferred or driven out into the public space, for example.
Transport & Logistics
When developing the x:tek driving plates, special thought was given to construction site logistics or logistics in general. The dimensions and the form factor of the x:tek mobile panels were deliberately dimensioned to be as small as necessary and as large as possible. The result is logistics, transport and loading space optimized dimensions of 2000 mm x 1220 mm. This means that the x:tek driving plate can be transported on almost any vehicle or trailer. For safe transport and quick unloading, we recommend our galvanized steel pallet, which is also transport-optimized without oversize, with folding safety brackets for quick unloading. If this is not mobile and flexible enough for you, we have our attachable wheels for the steel pallet to be able to move it self-sufficiently without forklift, wheel loader or other vehicle.
Driving plates sets & single sale
x:tek moving plates are now available as sets of 6 / 10 / 20 / 30 moving plates or as single moving plates. You need an offer, price, advice or a demo appointment on site? Please call us or send us an e-mail.
Securatek GmbH & Co KG
Phone: 06462 91507-0
Fax: 06462 91507-29
Catalog: PDF for download
|Set type||Trackway mats Set|
|Plates per set (piece)||10|
|Area per set (m²)||24,40|
|Linear meter per set (rm)||20,00|
|Set content (parts list)||1 x SmartStore transport rack 2020x1230mm, 10 x x:tek Hochleistungs Fahrplatte Kunststoff, 1 x SmartStore 400mm Eckwinkel-Set (4 x starr)|
|Product category||Soil protection, Trackway mats|
|Product line||x:tek - high performance trackway mats|
|Length, per piece (mm)||2000|
|Width, per piece (mm)||1220|
|Height, per piece (mm)||24 mm (with 6/6 profiling), 12 mm (core thickness without profiling)|
|Area per piece (m²)||2,44 m²|
|Weight per piece (kg)||32,00|
|Classification (TÜV/DIN/EN)||R11 Rutschhemmung DIN EN 16165:2021-12 Anhang B (6 mm SmartGrip)|
|Profiling (both sides)||Yes, selectable|
|Profiling (by type) 1||6 mm smartGrip|
|Profile thickness approx. (Page 1 | Page 2)||6 mm | 6 mm|
|Connection holes per plate||12, 8 x Mittellöcher, 4 x Ecklöcher|
|Types of joints / laying||Baustrasse, Road, Lanes (1-lane, 2-lane, 2-lane in H-principle, multi-lane arrangement), Platform (optimal for storage areas, assembly areas, parking areas, container spaces), Half bandage (optimal for high shear forces), Offset (optimal for laying curves & radii)|
|Load capacity¹ - substrate fixed & dry (≤t/piece)**||85|
|Load capacity² - substrate unpaved & dry (≤t/pc)**||40|
|Load capacity³ - substrate unpaved & wet (≤t/pc)**||15|
|**Notes on load capacity||All data on load-bearing capacity and protective effect depend, among other things, on factors such as temperature, soil class, soil properties, soil bearing capacity, contact areas, dynamics & direction of force application, an assessment of the subsoil by the user or a soil analysis by a surveyor or geotechnical expert on the bearing capacity of the soil is recommended before each use.|
|Material (1)||HDPE high performance plastic|
|Material thickness (mm)||12|
|Thermal expansion||Ja, bis zu ca. 1% (entspricht ca 10mm je Meter)|
|Color||black / anthracite|
|Moisture absorption (%)||0,01 %|
|Industries||Construction & building materials trade, Horticulture & Landscaping, Golf Course Construction & Maintenance, Track construction & rail traffic, Network construction & line construction, Pipeline construction & well sinking, Sports facility construction & leisure facility construction, Road construction & traffic route construction, Pond Construction & Hydraulic Engineering, Transport & Logistics, Events & Functions, Wind Turbines & Solar Farms, Civil defense & relief organizations|
|Transport dimensions, approx. (mm/kg)||2020x1230x550 mm | 380 kg|
|Transport quantity per truck, max:||24 Sets (a 30 Platten x 2,44 m² = 1756,80 m²)|
|Customs tariff number||39 20 10 89|