Single support for support plates 500x500x40
Single holder for storage of support plates or crane plates
- Order number: ASP-500-40-EH
Single holder for support plate 500 x 500 x 40 - 7.20 kg - 533 x 518 x 62 - 0.27 m² - galvanized steel - 3.0 material thickness. Single holder made of solid steel, suitable for storing support plates, support plates or crane plates suitable for size 50 x 50 x 4 cm. The slide-in frame for holding the support plate is made of high-quality galvanized steel (3.0 mm material thickness)
There are 3 slotted holes (2.0 x 1.0 cm each) on three sides of the support plate holder. In addition, there are 2 further oblong holes in each of the two stiffening rails support plate box (material thickness 5.0 mm).
Thus, an optimal mounting of the support plate holder to almost any vehicle, trailer, construction machine, equipment, work platform, crane, and much more is always guaranteed. It does not matter whether the support plate holder is mounted standing, hanging, lying, horizontally or vertically, because the locking bolt made of steel always holds the support plate securely in the slide-in frame. To prevent theft, the inserted support plate, we recommend using a padlock with an approx. 5.0 mm strong shackle (not included).
In addition to the practical benefits of the support plate holder, they increase the transport safety of the support plates thus carried on the vehicle. Therefore, we advise every customer to order the support plate holder always together with the support plates in a set or package.
It pays to compare - especially with regard to design, quality and workmanship
As support plate mounts are permanently exposed to strong vibrations caused by engine running or vehicle movements, possible weak points due to material fatigue have already been taken into account during design and production. Compared with cheaper and/or inferior products, the material input (in kg) is already an important indicator for assessing the quality to be expected.
In addition, you should pay attention to how the 90° angles were processed. In all support plate holders, the 90° angles of the insertion frame are made of one piece and bent. The transitions of the 90° angle were additionally welded. To further maximize the stiffness, two solid 6.0 mm stiffening rails / cross beams were additionally welded.
|Länge, je Stück (mm)||533|
|Breite, je Stück (mm)||518|
|Höhe, je Stück (mm)||62|
|Fläche je Stück (m²)||0,27 m²|
|Gewicht je Stück (kg)||7,20|
|**Hinweise zur Belastbarkeit||Alle Angaben zur Belastbarkeit und Schutzwirkung sind u.a. abhängig von Faktoren, wie z.B. Temperatur, Bodenklasse, Bodenbeschaffenheit, Bodentragfähigkeit, Kontaktflächen, Dynamik & Richtung der Krafteinbringung|
|Material (1)||Stahl, verzinkt|
|Materialstärke (mm)||3,0 mm|