The RGP45 lawn grid plate made of soft rubber has proven itself successfully thousands of times over as a DIN-tested fall protection mat (DIN EN 1176 & 1177) for fall heights of up to 1.5 meters. For this reason, the grass mat is also very often installed in private gardens for play towers, climbing towers, climbing equipment, play equipment, play scaffolding, slides, swings and trampolines as fall protection. Likewise in this customer reference.
In the first work step, the lawn area to be excavated under the swing was marked out large. In this case, 2 turf panels were to be laid, so an area of approx. 220 x 110 cm was excavated. Then the turf was excavated by means of a spade about 5.0 cm and all unevenness was leveled before Installation.
Now it was possible to start laying and connecting the grass grid plate. After the Installation the cells, honeycombs, or chambers of the lawn grid plate should be filled with mixture of topsoil/earth and lawn seed. The fall protection surface made in this way can be played on and loaded immediately.
However, to ensure healthy, lush, dense and sustainable grass growth, it is recommended to wait until the grass has grown to a height of approx. 5.0 cm before releasing the lawn / play area. The usual maintenance work such as lawn mowing or fertilizing is possible without any problems.
You are planning a similar project?
You need tips for product selection or installation?
Have you used any of our products?
Then we would be pleased if you upload your reference photos!