The Plastic Outrigger Pads with deep milling were used to safely accommodate Crane supports, crane claws, support feet, Outrigger Pads as well as booms of various vehicles, equipment, and machines. Thanks to the deep milled recess (ø 290 × 10 mm), the risk of accidental and dangerous slipping or sliding of the support leg is significantly reduced. Additional Safety offers the Anti-slip rubber coating made of floor-friendly rubber on the underside of the plate.
The high quality and stable bond between the rubber layer and the HDPE plastic is achieved during the manufacturing process by pressing or baking them together using high temperature and pressure in the press. This differs significantly from Outrigger Pads where the rubber layer is bonded using chemical adhesives.
Another quality feature is the rounded corners and edges, which were incorporated to improve the service life and reduce the risk of injury. Due to the low dead weight and the integrated carrying straps Our support pads are particularly easy to carry and position thanks to their suspension ropes. This effectively reduces setup times and facilitates transport and storage.
Effective load distribution and improved stability
Plastic Outrigger Pads enable reliable support of vehicles, caravans, motorhomes, trailers, equipment, machinery, containers or other objects, especially from soft and poorly load-bearing soils.
They are also suitable for use as supports on hard surfaces such as concrete, asphalt, paving stones, or other hard, sensitive, or solid surfaces. In addition to providing secure support and absorbing and distributing loads, protecting the floor or subsoil is also a key focus.
Outrigger Pads made of plastic instead of wood
Are you still using wooden beams, scaffolding planks, or formwork boards for support? Then you're familiar with all the disadvantages of wood. Compared to plastic, wood is less weather-resistant, less durable, and can splinter, break, crack, fall, and rot. As a result, wood must be constantly replaced, exchanged, and repurchased.
Heavy-duty and extremely pressure-resistant Outrigger Pads
Securatek outrigger pads and crane pads, on the other hand, are made of HDPE 500 HMW plastic. This plastic consists of high-density, high-molecular-weight polyethylene. The main features of this product are: Durability, rigidity, resistance resistance to environmental influences and chemicals, mechanical strength, abrasion resistance, low moisture absorption and weldability.
Plastic (PE) Outrigger Pads are more durable, weather-resistant, and, above all, significantly more efficient than wooden Outrigger Pads. They offer superior quality, strength, and very high load-bearing capacity. optimal load distribution while at the same time being significantly smaller in size and weight.
Outrigger Pad ANTI-SLIP standard sizes
Our ANTI-SLIP Outrigger Pads are available in standard sizes as listed below.
- 300 × 300 × 30 mm (25 mm HDPE + 5 mm rubber)
- 400 × 400 × 40 mm (35 mm HDPE + 5 mm rubber)
- 500 × 500 × 40 mm (35 mm HDPE + 5 mm rubber)
- 500 × 500 × 60 mm (55 mm HDPE + 5 mm rubber)
- 600 × 600 × 40 mm (35 mm HDPE + 5 mm rubber)
- 600 × 600 × 60 mm (55 mm HDPE + 5 mm rubber)
If you need larger Outrigger Pads, we recommend you take a look at our Crane Pads.
Crane Pad PRO standard sizes
Our PRO Crane Pads are available in standard sizes as listed below.
- 800 × 800 × 40 mm
- 800 × 800 × 60 mm
- 800 × 800 × 80 mm
- 1000 × 1000 × 40 mm
- 1000 × 1000 × 60 mm
- 1000 × 1000 × 80 mm
If you need even larger Outrigger Pads, we recommend that you request the desired size from us or configure them directly.
load distribution plates – custom-made according to customer requirements
Individual, custom-made & configured milled parts made of plastic semi-finished products for load distribution, shoring & stability
- Dimensions up to 4000 × 2000 × 140 mm
- CNC milling for logo or support feet
- Colors similar to RAL
