The Anti-slip Outrigger Pads with approx. 5 mm thick underside made of anti-slip & floor-protecting rubber For even greater safety and protection. The high quality and stable bond between the rubber layer and the HDPE plastic is achieved during the manufacturing process by pressing or baking them together using high temperature and pressure in the press.
This differs significantly from Outrigger Pads where the rubber layer is bonded using chemical adhesives. Thanks to the high-quality HDPE plastic, these anti-slip Outrigger Pads are just as durable. highly resilient, pressure-resistant & durable like the Pro version without rubber coating.
Another quality feature is the rounded corners and edgeswhich were incorporated to improve the service life and reduce the risk of injury. Due to the low weight and the incorporated Carrying straps Our support pads are particularly easy to carry and position thanks to their suspension ropes. This effectively reduces setup times and facilitates transport and storage.
Outrigger Pads for effective load distribution and improved stability
Plastic Outrigger Pads enable secure support of vehicles, caravans, motorhomes, trailers, equipment, machinery, containers or other objects, especially from soft and poorly load-bearing soils.
They are also suitable for support on hard surfaces such as concrete, asphalt, paving stones, or other hard, sensitive, or solid surfaces. In addition to providing secure support, they also offer... Absorption and distribution of loads stands, also the protection of the soil or underground in focus.
Outrigger Pads made of plastic instead of wood
Are you still using wooden beams, scaffolding planks, or formwork boards for support? Then you're familiar with all the disadvantages of wood. Compared to plastic, wood is less weather-resistant, less durable, and can splinter, break, crack, fall, and rot. As a result, wood must be constantly replaced, exchanged, and repurchased.
Highly resilient and extremely pressure-resistant
Securatek outrigger pads and crane pads, on the other hand, are made of HDPE 500 HMW plastic. This plastic consists of high-density, high-molecular-weight polyethylene. The main features of this product are: Durability, rigidity, resistance resistance to environmental influences and chemicals, mechanical strength, abrasion resistance, low moisture absorption.
Plastic (PE) Outrigger Pads are more durable, weather-resistant, and, above all, significantly more efficient than wooden Outrigger Pads. They offer superior quality, strength, and... very high resilience for optimal load distribution while at the same time significantly reducing dimensions and weight.
Outrigger Pad ANTI-SLIP standard sizes
Our ANTI-SLIP Outrigger Pads are available in standard sizes as listed below.
- 300 × 300 × 30 mm (25 mm HDPE + 5 mm rubber)
- 400 × 400 × 40 mm (35 mm HDPE + 5 mm rubber)
- 500 × 500 × 40 mm (35 mm HDPE + 5 mm rubber)
- 500 × 500 × 60 mm (55 mm HDPE + 5 mm rubber)
- 600 × 600 × 40 mm (35 mm HDPE + 5 mm rubber)
- 600 × 600 × 60 mm (55 mm HDPE + 5 mm rubber)
Should you require large Outrigger Pads, we recommend you take a look at our Crane Pads to look at
Crane Pad PRO standard sizes
Our PRO Crane Pads are available in standard sizes as listed below.
- 800 × 800 × 40 mm
- 800 × 800 × 60 mm
- 800 × 800 × 80 mm
- 1000 × 1000 × 40 mm
- 1000 × 1000 × 60 mm
- 1000 × 1000 × 80 mm
If you need even larger Outrigger Pads, we recommend that you request the desired size from us or configure them directly.
load distribution plates – custom-made according to customer requirements
Individual, custom-made & configured milled parts made of plastic semi-finished products for load distribution, shoring & stability
- Dimensions up to 4000 × 2000 × 140 mm
- CNC milling for logo or support feet
- Colors similar to RAL
View configurator
