Heavy-duty road plates

Ultra-robust heavy-duty road mats

Whenever heavy loads, machinery and vehicles need to be moved on soft, unstable ground, our pressure-resistant and load-distributing Heavy-duty panels are used. Our plastic panels are universally applicable and characterized by their high load-bearing capacity. They are ideally suited as temporary access solution for heavy vehicles and for Floor protection mats For example, in pipeline construction or the construction of wind turbines. Compared to Steel road plates, heavy-duty road mats are a significantly lighter alternative that is easier to handle.

Our heavy-duty road plates are ideal for demanding applications.

Typically, our Heavy-duty road plates Our heavy-duty drive-on mats are used wherever high loads, high traffic frequency, or soft, not particularly load-bearing soils are expected. There is hardly a surface for which we cannot offer a suitable heavy-duty drive-on mat. The range of applications for our heavy-duty mats extends from solutions as Ground protection From sensitive soils and event flooring to creating temporary paths and surfaces on unstable or boggy ground, these heavy-duty mats can be used on a variety of surfaces. They can also be laid on grass, cobblestones, and gravel. Here are some examples of indoor and outdoor applications for these mats:

• Temporary access matss & access roads
• Temporary shunting, storage & working areas on construction sites
• Crane parking spaces & support areas
• Temporary parking spaces & access routes
• Ground protection for festivals and events on lawns
• Flooring in factory halls in industry
• Asphalt protection for heavy transport
• Construction of wind and solar farms

The heavy-duty road plates distribute point loads evenly.

When heavy machinery such as excavators, wheel loaders, cranes, or dump trucks impact the ground, extremely high point loads are generated. This is precisely where the risk lies: the pressure is concentrated on small areas, which can cause soils to give way or paved surfaces to be damaged. Heavy-duty mats reliably distribute this load over a larger area, thereby creating a stable and safe driving and working zone – even in particularly demanding applications.

High load-bearing capacity even on soft ground

The condition of the ground plays a crucial role in planning. On damp meadows, waterlogged construction sites, arable land, or forest-like subsoil, the necessary load-bearing capacity is often lacking. Vehicles sink in, ruts appear immediately, and construction site logistics quickly grind to a halt. Heavy-duty road plates provide a solution in these situations. even load distributionThis improves accessibility and prevents machines from getting stuck or areas from requiring costly restoration. This ensures that projects remain plannable even in difficult soil conditions.

Heavy-duty road plates for protecting floors, vehicles and people

The heavy-duty road mats provide stability and prevent sinking from dump trucks and excavators, as well as equipment on soft surfaces. Vehicle wear is also reduced, as driving on the plastic panels is easier than on unpaved and uneven ground.

Our heavy-duty mats are also used to protect surfaces. If construction vehicles were to drive directly over grass, lawns, or other soft surfaces, ruts would form that would require extensive and often costly repairs after construction is complete. Hard surfaces like paving stones and road surfaces can be damaged by concentrated, heavy loads. This risk is also reduced by using heavy-duty plastic mats, as they distribute the load evenly across the surface.

All our heavy-duty plastic panels are equipped with a anti-slip profiling Equipped with [specific feature/component]. This ensures optimal grip for both vehicle tires and pedestrians walking across the panels. The risk of slipping or sliding is thus minimized in all weather conditions.

Safe to drive on in wet, muddy conditions and under continuous load

When access roads, lanes, or work areas are subjected to continuous and repeated traffic, the demands on their load-bearing capacity increase significantly. The subsoil is subjected to increasing stress due to this constant load, which, without appropriate measures, can quickly lead to ruts, subsidence, or dangerous unevenness. Our heavy-duty traffic mats create a resilient surface that remains safe even under intensive use. accessible and walkable remains – including anti-slip tread for better grip in wet and dirty conditions.

Save time and money when laying Heavy-duty road plates

Heavy-duty road plates can be used Quick installation, flexible expansion and immediate useThis reduces downtime, prevents costly temporary solutions, and minimizes consequential costs from damage to flooring or equipment. For you, rapid installation means greater project reliability, improved planning, and predictable cost processes. Especially in large projects, fewer truck journeys and faster installation result in measurable savings in logistics costs.

A lightweight slab like the 40 kg MaxiTrack can easily be carried and laid by two people by hand. Heavier slabs can be lifted and positioned using a crane or forklift. Fine alignment can then be achieved with a hand hook. Connecting the floor slabs offset, around a corner or as a curve This is easily possible. The ability to lay the heavy-duty road plates in a staggered pattern increases stability.

The advantages of our heavy-duty road mats

Compared to materials such as wood, steel or aluminium, heavy-duty plastic panels are more durable and resistant to environmental influences, can be reused again and again and offer a high load-bearing capacity.

HDPE plastic: durable, weather-resistant, low-maintenance

A special blend of high-density polyethylene (HDPE) plastic is used to manufacture the heavy-duty road plates. This plastic is characterized by its high robustness and is extremely flexible and elastic. temperature and weather resistantIt does not absorb moisture. It is also resistant to acids, alkalis, and oil. The specific gravity of plastic is many times lower than that of aluminum and steel, which makes it Transport and installation costs significantly reduced Plastic panels are also easy to clean. Compared to steel panels, plastic panels are lighter and do not rust. They also do not rot, decay, or splinter like wooden panels do.

Our heavy-duty plastic sheets at a glance

With us, you'll find the perfect heavy-duty road plates for your needs and applications, ensuring maximum safety for both people and machinery. All our plates feature a profiled top and bottom surface and are characterized by their high resistance. Thanks to the overlapping edges of the heavy-duty road plates, maximum load and force transfer is achieved when installed together. This means the entire system, working as a unit, bears and distributes the load, unlike Steel road plates, aluminum panels, or excavator mats, where each individual element must support the full load. Furthermore, the overlapping design significantly reduces the amount of mud that can penetrate the joints of conventional plates.

MaxiTrack heavy-duty road plate – the lightweight and compact solution

The MaxiTrack heavy-duty paving slab, measuring 1800 × 900 × 34 mm and weighing only 40 kg, is the ideal choice when you need to create safe, heavy-duty temporary walkways and surfaces, as well as optimal floor protection, even in confined spaces. Made of pressure-resistant HDPE plastic, the slab can be laid by hand by two people. The slab is equipped with Load capacity up to 130tA perfectly matching transport box is available as an accessory.

MegaTrack heavy-duty road plate – the all-rounder for every application

The 3000 × 2000 mm and load-bearing capacity of up to 200t The plate is ideal for almost all applications, even in difficult terrain. The 5 mm thick TriangleGrip profile with R11 slip resistance offers high safety when driving and walking on it.

SignaRoad heavy-duty road plate the floating solution

Thanks to its weight-saving honeycomb chamber system, the 3000 × 2000 × 64 mm heavy-duty flooring is buoyant. Another advantage is the "Lock&Go" quick-connect system, which saves time and therefore costs when setting up temporary access roads and other construction surfaces. The profiling on both sides ensures optimal grip. Load capacity of up to 260t The heavy-duty road plate is the ideal choice for tough applications.

MegaDeck HD+ heavy-duty road plate – for extreme loads

At 4300 × 2300 × 101 mm, the MegaDeck HD+ is our largest heavy-duty sheet. It is equipped with load capacity up to 380 tons This ensures maximum safety, even under the most challenging conditions. It is significantly lighter than Steel road plates of comparable size. This makes handling easier, as you can simply use wheel loaders and forklifts.

Buy and rent heavy-duty road plates from Securatek

Do you have questions or would you like a quote? Then contact usOur team of experts will help you choose the right panel. If you only need the panels for a single project, you can also rent heavy-duty panels from us. Whether you buy or rent, at Securatek you benefit from these advantages:

• High quality: Our references confirm this.
• Shipping faster: As a rule, all track mats are available for immediate delivery.
• Over 20 years of experience in the area of ​​soil protection and road plates.
• Expert advice by our team of experts.