In this reference, the customer has chosen to create a gravel area with the gravel honeycomb KW30 instead of a paved yard. First, the customer paved a small walkway with cobblestones at the edge. This is nice to look at, but also very functional. Then the customer made the laying bed or subfloor for the car driveway and smoothed it out so that later the backfilled buw Overfilled gravel honeycomb is at the same level as the top edge of the paved walkway. However, for maintenance reasons, we recommend that the gravel surface be placed approx. 1 - 2 cm below the paved surface. This prevents gravel or crushed stone from getting on the paved surface.
After spreading the bed of fine chippings, it was leveled by means of a batten . Subsequently, the gravel honeycombs were laid on the split bed . To optimize the waste, it is recommended to lay the gravel honeycombs first so that they do not have to be cut to size. After all gravel honeycombs have been laid in this grid, the finishing work can begin. This means that the missing honeycomb mats can now be cut to fit exactly. We recommend a distance to the edge / border of approx. 3-5 cm.
On the so finished area the gravel honeycombs can already be filled with gravel or crushed stone, or be overfilled. Finally, the entire surface can be firmly vibrated with a vibrating plate, but this is not mandatory. If you have any further questions about the product , please contact our technical advisor.
You are planning a similar project?
You need tips for product selection or installation?
Have you used any of our products?
Then we would be pleased if you upload your reference photos!
