Outrigger Pad · ANTI-SLIP
Even more safety & protection thanks to rubberized anti-slip underside made of non-slip and floor-protecting rubber
- 300x300x25+5mm (4t**)
- High quality HDPE 500 plastic
- Rubberized rubber bottom
- Load distribution & stability
- Rounded corners
- Chamfered edges
- Order number: ASP-300-300-30-AR5
The support plates with approx. 5mm thick ANTI-Rustch rubberized underside made of anti-slip & floor-protecting rubber for even more safety and protection. The high quality and stable bond of the rubber layer with the HDPE plastic is achieved in the manufacturing process by the joint pressing or bonding by means of high temperature and pressure of the press. This differs significantly from support plates where the rubber layer is bonded by means of chemical glue. Due to the high quality HDPE plastic, the anti-slip support plates are just as heavy-duty, pressure-resistant & durable as the PRO variant without rubber coating
Another quality feature is the rounded corners and edges, which have been incorporated to improve durability and reduce the risk of injury. Due to the low dead weight and the incorporated carrying loops or carrying ropes, our support plates are particularly easy to carry and place. This effectively reduces set-up time and facilitates transportation and storage.
Effective load distribution and improved stability
Plastic support plates provide solid support for vehicles, caravans, motor homes, trailers, equipment, machinery, containers or other objects, especially from soft and poorly load-bearing soils. In addition, they are suitable for support on hard floors such as concrete, asphalt, pavement or other hard sensitive or solid floors. In addition to any safe support and the absorption and distribution of loads, the focus is also on the protection of the floor or subsoil.
Support plates made of plastic instead of wood
Are you still using wooden beams or scaffolding planks or form boards for shoring? Then you are aware of all the disadvantages of wood. Compared to plastic, wood is not weather resistant, not as heavy duty, can splinter, break, crack, fall and rot. So wood has to be replaced, exchanged and re-purchased over and over again.
Heavy duty and extremely pressure resistant support plates
Support plates and crane plates from Securatek, on the other hand, are made of HDPE 500 HMW plastic. This plastic is made of a high density, high molecular weight polyethylene. The main features of this product are: Durability, rigidity, resistance to environmental conditions and chemicals, mechanical strength, abrasion resistance, low moisture absorption and weldability.Support plates made of plastic (PE) are more durable, weather resistant and, above all, significantly more efficient than support plates made of wood. In comparison, they offer excellent quality, strength and very high load-bearing capacity for optimum load distribution with significantly smaller dimensions and dead weight.
Support plate ANTI-RUTSCH standard sizes
Our support plate ANTI-RUTSCH are available in stock in standard sizes as listed below.
- 300x300x30mm (25mm HDPE + 5mm rubber)
- 400x400x40mm (35mm HDPE + 5mm rubber)
- 500x500x40mm (35mm HDPE + 5mm rubber)
- 500x500x60mm (55mm HDPE + 5mm rubber)
- 600x600x40mm (35mm HDPE + 5mm rubber)
- 600x600x60mm (55mm HDPE + 5mm rubber)
If you need bigger support plates, we recommend you to have a look at our crane plates.
Crane plate PRO standard sizes
Our crane plates PRO are available from stock in standard sizes as listed below.
- 800x800x40mm
- 800x800x60mm
- 800x800x80mm
- 1000x1000x40mm
- 1000x1000x60mm
- 1000x1000x80mm
If you need even bigger support plates, we recommend you to ask us for the desired size or to configure it directly.
Load distribution plates - made to measure according to customer requirements
Individual, custom-made & configured milled parts made of semi-finished plastic products for load distribution, underpinning & stability
- Dimensions up to 4000x2000x140mm
- CNC milling for logo or support feet
- Colors similar to RAL
Product category | Support technique, Support plates |
Length, per piece (mm) | 300 |
Width, per piece (mm) | 300 |
Height, per piece (mm) | 30 |
Load capacity¹ - substrate fixed & dry (≤t/piece)** | 4,0 |
Gleitreibbeiwert | μ = 0,50 (Reibbeiwert, Beton/Securatek ANTI-Rutsch, bei bei trockenen Umgebungsbedingungen, VDI Richtlinie 2700 Blatt 14:2011-09 und DIN EN 12195-1:2011-06) |
Weight per piece (kg) | 3,50 |
Carrying handles (type) | Loop(s), Suspension rope |
Carrying handles (quantity) | 1 |
Stackable | Yes |
**Notes on load capacity | All data on load-bearing capacity and protective effect depend, among other things, on factors such as temperature, soil class, soil properties, soil bearing capacity, contact areas, dynamics & direction of force application, an assessment of the subsoil by the user or a soil analysis by a surveyor or geotechnical expert on the bearing capacity of the soil is recommended before each use. |
Material (1) | HDPE plastic + rubber |
Material thickness (mm) | 30 mm (25mm HDPE + 5mm rubber) |
Color | black (ca.80%) + colorful (ca.20%) |
Industries | Agriculture & Agricultural Technology, Structural & Civil Engineering, Construction Logistics & Infrastructure, Construction machinery trade & construction equipment trade, Civil Defense & Defense, Hydraulic engineering & pond construction, Forestry & Forestry Technology, Animal husbandry & stable construction, Heavy transport & crane work, Machine relocations & assembly, Greenkeeping & Golf Course Construction, Elevated access & working platforms, Events & functions, Pipeline construction & sewer rehabilitation, Line construction & network construction, Horticulture & Landscaping, Track construction & rail traffic, Sports facility construction & leisure facility construction, Road construction & traffic route construction, Wind Turbines & Solar Farms, Cities, Towns & Municipalities |
Package shippable | Yes |